Monday, July 29, 2013

Fimir - Modelling saliva and drool


Today I've been experimenting with a new method of adding drool and saliva to my recently completed marlwyrm. I've not added saliva or drool to a model in a long time, and my materials and techniques needed a little updating. After some advice from Madrab (Ciaran Bolger) from the Wargaming Ireland forums, I had a lead on a new product, UHU Twist & Glue.

Ciaran Bolger's fantastic Throne of Everblight
 I had been using Evo Stik Impact, but this was only good when mixed with an ink for blood, gore and such as it has a yellow tint, so no good for saliva. Then main difference between Impact and Twist & Glue (T&G from here on in) is that Impact is viscous out of the tube, but T&G is runny, and needs to be allowed to partially set before use. After a few minutes I used a thin steel rod to twirl some glue onto, and hence onto the first contact point on the worm's mouth. I then drew out the glue into the stringy shape I wanted, and rolled the glue from the rod onto the second contact point.

Once dry, I figured that while it looks great, it'll be soon annihilated by use on the table, so I added a coat of gloss varnish. This has two benefits, it hardens the glue to better withstand the rigour of gaming, and also thickens the strands so they can be more easily seen. I'm pretty happy with the results.

(Edit: One other little side-effect of the gloss varnish I didn't notice is that any areas where the UHU has dried white are turned clear again once the gloss is applied as it partially melts the glue. A word of caution though, too much gloss will melt your strings of saliva! Apply sparingly once the glue is TOTALLY dry. Learned the hard way there.)

4 comments:

  1. Damned if this isn't the most gruesome thing I've ever seen on my blog feed, Mr. Saturday. Yyyyeccchh!

    ReplyDelete
  2. Looks great and nice tip on the product.

    For hardening & protecting it, have you tried super glue?

    ReplyDelete
    Replies
    1. No, not yet. I would have thought super glue would dissolve the other glue or leave the dreaded white frost on the model. Must give it a shot.

      Delete

Wayland Games

Related Posts Plugin for WordPress, Blogger...